NovAseptic
®
GMP Mixer Components
Catalog numbers and specifications for the components listed here can be found on
the appropriate specification sheet.
Mixing Head
(GM#/12#)
Handle the mixing head with care. The bearing material is
hard and brittle. Keep the magnetic body away from any
particles that may adhere to it.
Key Number
Description
1
Magnetic body
2
Wings
3
Silicone carbide female
bearing
4
Serial number
Male Bearing (GM#/2#)
The male bearing keeps the mixing head in a correct position; it mounts on the tank
plate inside vessel.
Key Number
Description
5
Stainless steel support
6
Silicone carbide bearing
7
Connection thread
8
Groove
9
O-ring
10
Serial number
Tank Plate (GM#/3#) or Flanged Tank Plate (GM#/312)
Each tank plate is marked with the serial number and
a mill stamp that corresponds to its heat number.
The tank plate is mounted, welded, or flanged onto
the vessel and is considered an integrated part of the
vessel. The tank plate must comply with your local
pressure code.
Key Number
Description
11
Male bearing connection thread
12
Welding edge
13
Drive unit connection flange
14
Serial number
15
O-ring (on flanged tank plate only)
x
x
x
xxx
x
5
9
6
8
10
7
xxxxxxx
3
4
2
1
12
14
13
15
11
Flanged tank plate
11
12
14
13
Welded tank plate
6
www.millipore.com
Summary of Contents for NovAseptic GMP
Page 4: ...4 www millipore com...
