P. 45 / 68
920MHz Band Wireless Device (Korea) USERS MANUAL EM-9121 Rev. 1
6.2.2 SETTING RECEIVER
Set the second wireless device as a receiver.
Do not perform other operations than measurement of RSSI and PER after the receiver setting is complete.
To perform other operations, terminate the measurement tool (refer to “6.3 TERMINATING MEASUREMENT TOOL” on page 51)
and return to the normal mode.
1) Both sleeve and rooftop antennas can be used.
2) Connect the device to the PC with the maintenance console using a mini USB cable and turn on the power of the device.
3) Start the maintenance console and click [Measurement tool] on the main screen.
Figure 6.26 Maintenance console main screen
4) When the following screen appears, check ‘Communication test mode (Receiver)’ and click [Change mode].
Figure 6.27 Selecting communication test (Receiver)
