manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 20

20

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

3.3  Network setting

The TR30 is equipped with Web server functions.  With the help of these functions, a PC, tablet terminal or 
smartphone can be used for remote monitoring.
And, setting changes can either be made via a network, or the FTP server function can be used to transfer or 
delete data which is stored in the device from a PC.

There are 2 methods of connecting the TR30 via a network.
Please set appropriately to suit the usage environment.

 

■

Connect using a local network (LAN)

This is a method in which 1 device is connected to the inhouse LAN, and monitored using a terminal connect-
ed to the same network.

 

■

Connect via the Internet (WAN)

This is a method in which 1 device is connected to a broadband router, and remotely monitored via the Inter-
net.

TR30

PC

SD CARD

Viewer software (model: TRViewer)

■

 STAND-ALONE

Router

Ethernet

LAN

PC

TR30

Tablet

Router 

*

1

Internet

(WAN)

■

 VIA INTERNET (WAN)

ISP

ISP

Mobile Line

*

1. D.DNS service or static IP address is reguired.

Note: Data storing to SD card is performed at every transfer rate.

Wi-Fi Router

Tablet

■

 VIA LOCAL NETWORK (LAN)

Ethernet

PC

TR30

Hub

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands