R3-NMW1F
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-8286 P. 4 / 10
CONFIGURATOR SOFTWARE SETTING
With configurator software, settings shown below are available.
Refer to the software manual of R3CON for detailed operation.
■
WIRED SETTING
ITEM
SETTING RANGE
DEFAULT
Communication timeout
2 – 32000 (100 msec.)
30 (100 msec.)
■
MODBUS SETTING
ITEM
SETTING RANGE
DEFAULT
Address
1 – 247
1
Data Mode
RTU / ASCII
RTU
Baud rate
38.4 kbps / 19.2 kbps / 9600 bps / 4800 bps
38.4 kbps
Parity
Odd / Even / None
None
Write enable port
RS-485 / wireless
RS-485
Slave or Relay
Slave / Relay
Slave
■
WIRELESS SETTING
ITEM
SETTING RANGE
DEFAULT
PAN-ID
0000 to FFFE (hexadecimal, 4 digits)
0000
Radio channel number
0 (invalid), 1 to 43 (selectable up to 10 channels)
0
Short address
0000 (invalid), 0001 to FFFD (hexadecimal, 4 digits)
0000
Network name
English one-byte characters within 16 characters
(one-byte space, “-”, “_”, “.”, “@” are usable.)
Blank
Encryption key
0000...0 to FFFF...F (hexadecimal, 32 digits)
0000...0
Transmitter power output
0.16 mW / 1 mW / 20 mW
20 mW
Communication timeout
0 to 32767 (100 msec.)
30
Number of devices in a network
1 – 30 (devices) /
31 – 60 (devices) /
61 – 100 (devices) /
Fixed + Low speed movement
1 – 30
Packet filtering
Disable / Enable
Enable
Filter timeout on polling (100msec) 10 to 600 (100 msec.)
10
Fixed route
Disable / Enable
Disable
Destination short address
0000 to FFFD (hexadecimal, 4 digits)
0000
Temporary detour
Disable / Enable
Enable
Low speed moving mode
Disable / Enable
Disable
Set network quality
Standard / Changing frequency • delaytime middle /
Changing frequency • delaytime large
Standard
Network join mode
V3-compatible mode / Fast join mode
V3-compatible mode
Retry times before route switching
1 to 3 (times)
3
