98
DL8 USERS
MANUAL EM-7691-B Rev.24
9.2 COMMUNICATION SETTING
(1) Connect the DL8 with the COP-US cable to the PC to which the DLCFG is installed.
For connection setting, refer to 4.3 IP ADDRESS SETTING.
COP-US
CFG
DLCFG
(2) Start the DLCFG to show the main window.
Click [Download from device] button to read setting from the DL8 and to open “Configuration” window.
Click on [Communication] − [SMTP/POP3] button to open “SMTP/POP3” dialog.
Communication
2.Click
3.Click
SMTP/POP3
Configuration
Main Window
1.Click
(3) See the following table and configure each parameter.
PARAMETER
DESCRIPTION
SMTP over SSL
Encrypted communication setting. Set “Enable” to use.
SMTP authentication
Authentication
method
SMTP authentication setting
Disable: No SMTP authentication
Auto: Authentication algorithm is determined automatically
CRAM-MD5: CRAM-MD5 authentication
LOGIN: LOGIN authentication
PLAIN: PLAIN authentication
ID
Set an ID except when “Disable” is set in SMTP authentication.
Password
Set a password except when “Disable” is set in SMTP authentication.
POP before SMTP
Authentication
Set “Enable” when POP before SMTP is required.
POP3 ID
Set a POP3 ID when “Enable” is set in POP before SMTP.
POP3 password
Set a POP3 password when “Enable” is set in POP before SMTP.
DL8 e-mail address
Set an e-mail address of the DL8.
SMTP server IP address
Set a domain name or IP address of SMTP server.
POP3 server IP address
Set a domain name or IP address of POP3 server.
Used for POP before SMTP.
DL8 e-mail account
Set the part of e-mail address preceding "@" as an e-mail account of the
DL8.
Sender name
Set a sender name to show on the recipients’ screen.
SMTP port address
Set a SMTP port address.
POP3 port address
Set a POP3 port address.
Used for POP before SMTP.
STARTTLS
Set “Disable” or “Enable” when “Enable” is selected in SMTP over SSL.
(4) Click [OK] button to save the setting temporarily.
To enable the new setting, return to “Configuration” window and click [Upload to device] button.
