background image

73VR2102 / 73VR2104 / 73VR2106

73VR2108 / 73VR2110 / 73VR2112

– 17 –

7.  PREPARATION & WIRING TO THE UNIT

7.1  INSERTING CF CARD

Insert a CF card to store recorded data and setting of Paperless Recorder.

 INSERTING THE CF CARD

(1)  Turn off the power supply to the 73VR21x.
(2)  Open the front cover.

(3)  Insert the CF card so that its side without label is on the top.

(4)  Push it in until EJECT button is popped up.

(5)  Close the front cover.

NOTES  – How to Take the CF Card Out –

(1)  When the 73VR21x is recording data, touch [ MENU ] key on the right bottom on the 

screen and touch [ Stop ] to stop the recording.

(2)  Push EJECT button to the right side of the card slot and take the card out.

7.2 WIRING

 TERMINAL

Please choose appropriate solderless terminals for the power and input terminals, refer

-

ring to the figure to the right.  Appropriate tightening torque is 0.5 N·m.

Connection: M3 screw terminal
Screw terminal material: Nickel-plated steel
Applicable wire size: 0.25 to 1.65 mm

2

 (AWG 22 to 16)

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

6 (.24) max

3.3 (.13) max

mm (inch)

CF Card

TOP

Summary of Contents for 73VR2102


























Reviews: