M-system 6BTS1 Instruction Manual Download Page 1

BEFORE USE ....

Thank you for choosing M-System.  Before use, please check 
contents of the package you received as outlined below.
If you have any problems or questions with the product, 
please contact M-System’s Sales Office or representatives.

 

PACKAGE INCLUDES:

Transmitter module (body + CJC sensor) ..........................(1)
Outdoor enclosure ...............................................................(1)
Mounting screws
  Bolt (M8 × 15) ....................................................................(4)
  Spring washer for M8 .......................................................(4)
Mounting bracket assembly (optional)
  Mounting bracket ..............................................................(1)
  M10 U-bolt .........................................................................(2)
  Nut for M10 .......................................................................(4)
  Spring washer for M10 .....................................................(4)

 

MODEL NO.

Confirm Model No. marking on the product to be exactly 
what you ordered.

 

INSTRUCTION MANUAL

This manual describes necessary points of caution when 
you use this product, including installation, connection and 
basic maintenance procedures.

POINTS OF CAUTION

 

GENERAL PRECAUTIONS

• Before you remove the unit or mount it, turn off the power 

supply and input signal for safety.

 

ENVIRONMENT

• Do not install the unit where it is subjected to continuous 

vibration.  Do not subject the unit to physical impact.

• Environmental temperature must be within -5 to +70°C 

(23 to 158°F) with relative humidity within 30 to 90% RH 
in order to ensure adequate life span and operation.

 

WIRING

• Do not install cables close to noise sources (relay drive 

cable, high frequency line, etc.).

• Do not bind these cables together with those in which 

noises are present.  Do not install them in the same duct.

 

AND ....

• The unit is designed to function as soon as power is sup-

plied, however, a warm up for 10 minutes is required for 
satisfying complete performance described in the data 
sheet.

THERMOCOUPLE TRANSMITTER

(field-configurable, non-linearization)

MODEL

6BTS1

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201  Fax: +81(6)6659-8510  E-mail: info@m-system.co.jp

EM-8861  P. 1 / 6

INSTRUCTION MANUAL

Reviews: