49
47DR OPERATING MANUAL EM-9509-B Rev.7
3
Press Alarm/
↓
or Init/
↑
button to go to the temperature unit set-
ting.
• ‘C’ is indicated.
• The SD indicates ‘UNIT’.
NOTE
Skip to Step 7 if the default value is acceptable.
4
Press Shift button to shift the display into the setting standby
mode.
• The indication starts blinking, to which you can apply changes.
5
Press Up button to select ‘F’.
6
Press Alarm/
↓
or Init/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the decimal point position will be indicated (‘D-POINT’ on the SD).
• Press Init/
↑
button, and the input type will be indicated (‘RTTYPE’ on the SD).
7
■
TO GO ON TO SET THE SETTING DECIMAL POINT POSITION,
Skip to Step 2 in “5. SETTING DECIMAL POINT POSITION”.
■
TO QUIT,
Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode.
Blinking
Blinking
