M Solutions MS-TestPro MS103TDs User Manual Download Page 94

Page: 94 / 113

MS-TestPro

User’s Manual

Page 94 of 113

Figure 119: System Setup screen

5.4.1

System Upgrade

➔

To upgrade the MS-TestPro System Software:

Prepare a USB memory stick with the upgrade file

updateXXX.mst

in the root folder or

copy the file to the PC directory.
Connect the stick to one of the USB ports in the MS-TestPro device.

Select the

updateXXX.mst

file and tap on the

Upgrade

button (see the picture below). The

system performs the upgrade and reboots using the new version in approximately 10
seconds.

IMPORTANT

* For firmware version 2.00.30 or earlier, the file name is

update.mst

Do not switch off the device’s

power during the upgrade!

Summary of Contents for MS-TestPro MS103TDs


















































































































Search results

Summary of Contents for MS-TestPro MS103TDs

Reviews:

Related manuals for MS-TestPro MS103TDs

Brands by name

Popular brands

M Solutions MS-TestPro MS103TDs, User Manual

Search results

Summary of Contents for MS-TestPro MS103TDs

Reviews:

Related manuals for MS-TestPro MS103TDs

Brands by name

Popular brands