ISM0210 Instruction Manual of series SCE- Rev.03
Pag. 5/33
−
the repair and / or maintenance was not carried out strictly in accordance with the instructions;
−
the pump has not been installed and put into service as instructed;
−
the repairs were not made by staff
M PUMPS PROCESS
or were made without consulting
M PUMPS
PROCESS
;
−
spare parts are not original were used;
−
lubricants were used different from those recommended;
−
the parts supplied were not used according to their nature and / or destination;
−
the parts supplied were used carelessly, negligently, improperly;
−
the parts supplied were damaged due to external circumstances.
All wear parts are excluded from warranty.
NAMEPLATE
The pump for installation in ordinary environments has the nameplate on the side of the support as shown: only
the fields are compiled must be considered relevant and therefore valid for identification.
-PUMP UNIT SUPPLIED WITH ELECTRICAL MOTOR:
-PUMP UNIT SUPPLIED WITHOUT ELECTRICAL MOTOR:
