10 of 24
IU_ MiniTech_05_eng
User instructions
MiniTech
Code changing
WARNING: it is recommended to always perform this operation with door open.
Manager (ID 01), users (ID 02-49) and override users (ID 50-59)
Power up the keypad. Press and hold
. LCD shows:
ENTER OLD CODE
X X – X X X X X X
Enter the
old code
. LCD shows:
ENTER NEW CODE
X X X X X X
Enter the
new code
. LCD shows:
CONFIRM CODE
X X X X X X
Confirm the
new code
.
Install/Disable/Delete users
Power up the keypad. Press and hold
. LCD shows:
USERS MANAGEMENT
0 1 – X X X X X X
Enter Manager code.
Press
to scroll users list or enter user ID.
02 03 04 05 06
x _ _
“
” user installed, “_” user deleted, “X” user disabled.
Override users 50 ÷ 59 can be only installed when the lock is open.
Press
. If the user is not installed LCD shows:
02
INSTALL?
“ ” Dallas key, “
” code, “+” dual mode, “TL” time lock
Press
to confirm or
to exit or for switching to the next user.
Enter the new user code and confirm it.
If the selected user is already installed, press
to choose whether
to disable it, to delete it or for leaving and selecting another user. Press
to confirm the choice.
Lock setup
Lock setup can be performed through a Dallas key properly programmed or through a direct
PC link. In both cases, lock must be in pre-setup mode (press 1 to open it).
Setup with Dallas key
Summary of Contents for MiniTech
Page 1: ...MiniTech User Instructions...
