IU_MiniTech_05_eng
13 of 24
User instructions
MiniTech
Keypad language
Power up the keypad. Press and old
. LCD shows:
ITALIANO
1 2 3
Enter one of the numbers shown on the LCD to select a new language
(the new language will be automatically changed). Press
to
confirm or
to exit.
ENGLISH
1 2 3
Audit
Keypad and lock events can be checked on the LCD (only openings and closings). These
events can be also stored in a Dallas key previously programmed using “DMT Audit”
software.
Dallas key only allows to store the last 1200 events which can be later downloaded on
PC through an USB interface
.
Direct PC connection allows to download all 5500 events, using an USB interface and a
specific softwar
e.
For further information, refer to the user manual IU_DMT_Audit_00_XX or contact
M-
LOCKS.
Events check on LCD
Use this function to check all opening and closing events previously recorded.
Power up the keypad. Press and old
. LCD shows:
LOCK AUDIT
0 1 – X X X X X X
Enter Manager code. LCD shows:
ENTER DALLAS
…
Wait for few seconds or press
, LCD shows:
PC LINK
SCROLL EVENTS
Press
, LCD shows:
SCROLL EVENTS
ON LCD
Wait for few seconds, LCD shows the last opening/closing event.
001:
WED
28/09
14:42:48
Press
to scroll all the events or
to exit.
Download the audit on a Dallas key
Power up the keypad. Press and old
. LCD shows:
LOCK AUDIT
0 1 – X X X X X X
Summary of Contents for MiniTech
Page 1: ...MiniTech User Instructions...
