M K Martin Enterprise Skid Steer Thirfty Cutter Manual Download Page 5

 

Safety – It’s in your interest

 

Safety Guidelines. 

Safety of the operator is one of our main concerns, however it is up to the operator to 
practice caution.   
To avoid personal injury, study the following precautions and insist that those that are 
working with you to follow them.                                           
 
The Skid Steer Thrifty Cutter has a chain guard at the front of the machine, to lower 
the possibility of debris being ejected out of the machine.  
The cutter has a cover plate in the deck to gain access to one side of the blade bolts, 
do not operate the cutter with this removed or missing. 

This cutter has High Pressure hydraulic lines and a leak can be extremely 

hazardous! 
 
Replace any decals that may be missing or not readable. Location of the decals are 
indicated elsewhere in this manual. 
 
Do not use this machine while under the influence of drugs or alcohol. 
 
Review the safety instructions with all users annually. 
 
This equipment should not be operated by children: or those unfamiliar with the 
operation of the Skid Steer Thrifty® Cutter. 

Do not allow persons to operate this 

machine until they have read this manual and/or were instructed by a qualified 
person.

 

 
Do not paint over, remove or deface any safety signs or warning decals on the 
Thrifty® Cutter. 

Observe all safety signs and practice the instructions on them. 

 
Do not use this machine to push or carry objects or people.   

Please be careful with the extra length on the front of the loader, you need a 

larger space to turn.  

 

 

Please stop the engine on the loader and set the cutter on a solid 

support! 

When servicing the blades do not work or walk under an unsupported 

cutter! 
 
 

 

4

Summary of Contents for Skid Steer Thirfty Cutter













Reviews: