K11-R sealing unit
70
IDM 510-065-1
English language
Operation and maintenance manual
Replacement of the cutting blade
The figure shows the points of intervention and the description shows the proce-
dures to be adopted.
–
The intervention must be carried
out with the machine stopped in
safety conditions.
Attention
Warning
Wear the suitable personal protective
equipment (gloves) to avoid any cut-
ting hazard.
1.
Lift guard
A
and keep it in position by
means of lever
B
.
2.
Slightly loosen screws
C
.
3.
Extract blade
D
.
4.
Install new blade and lock it with
screws
C
.
Upper sealing unit: sharp edge to the
bottom.
Lower sealing unit: sharp edge to the
top.
5.
Spread a thin layer of lubricant on
blade in order to avoid the accumula-
tion of glue residues.
6.
Release lever
B
.
– Guard
A
returns to its position.
7.
Repeat the operation on the other equal component.
Important
Replace the components ONLY with GENUINE SPARE PARTS or with other compo-
nents of equivalent design and functional specifications.
