M Confort Eolus 35, User Manual

Page: 16 / 48

12
MCONFORT EOLUS35
- Accessories and control panel.
III. INSTALLATION AND USE
- Installation: This equipment comes ready for use. Does not require installation.
- Important note: This type of cooler should not be used in closed or poorly ventilated
spaces. In order for the performance of the equipment to be adequate, it must draw fresh
air from outside.
- Using the buttons:
Press the buttons to activate the corresponding function.
1-. Connect the equipment to the electrical network. You will hear a beep. Now
the device is in Stand-by mode. Only the ON / SPEED button is functional.
2-. ON / SPEED button: Press this button to turn on the device from the stand-by
mode. Press this button to select the different ventilation speeds: high, medium
and low. Each press will be accompanied by a confirmation sound.
3-. OFF button: With the equipment running, press this button to turn it off. The
equipment will go to stand-by mode.
4-. COOL button: While the device is running, press this button to connect the
cooling / humidification function. The corresponding icon will light up in the
control display. Press it again to disconnect the function.
5-. SWING button: Press this button to connect the lateral oscillation function of
the air flow. The corresponding icon will light up. Press the button again to
disconnect the function. The vertical adjustment of the grids can be done
manually.