background image

Table of Contents

Studiophile BX10s Deluxe Subwoofer

Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

What’s in the Box?

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

SBX10 Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

1. Subwoofer Driver . . . . . . . . . . . . . . . . . . . . . . . . . .  5
2. LED Indicator  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
3. Variable Crossover  . . . . . . . . . . . . . . . . . . . . . . . . .  6
4. Phase Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
5. Unbalanced RCA Inputs . . . . . . . . . . . . . . . . . . . . . .  7
6. TRS Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
7. XLR Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
8. Bass Reflex Port  . . . . . . . . . . . . . . . . . . . . . . . . . .  7
9. XLR Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
10. TRS Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
11. Subwoofer Bypass/Defeat  . . . . . . . . . . . . . . . . . . . .  8
12. Volume Control. . . . . . . . . . . . . . . . . . . . . . . . . . .  8
13. Power Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
14. Power Socket  . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
15. AC Voltage Select Switch . . . . . . . . . . . . . . . . . . . .  8
Power Amplifier (not pictured)  . . . . . . . . . . . . . . . . . . . .  8
Enclosure (not pictured) . . . . . . . . . . . . . . . . . . . . . . . .  9
Thermal Protection (not pictured)  . . . . . . . . . . . . . . . . . .  9

Setting Up the SBX10 Subwoofer

 . . . . . . . . . . . . . . . . . . . . . 10

Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting the Back Panel Controls  . . . . . . . . . . . . . . . . . 11

Placing the SBX10 Subwoofer

 . . . . . . . . . . . . . . . . . . . . . . . 13

Where to Start  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Appendix A - Technical Specifications

 . . . . . . . . . . . . . . . . . . 14

Appendix B - Block Diagram

 . . . . . . . . . . . . . . . . . . . . . . . . 15

Your SBX10 Warranty

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Warranty Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Warranty Registration  . . . . . . . . . . . . . . . . . . . . . . . . . 16

Summary of Contents for SBX10


















Reviews: