SMU-1
USB CONDENSER MICROPHONE
User Manual
Hello!
Welcome to the LyxPro™ family. This guide helps you get to know your new microphone
a little better. For additional information and technical support, please contact our
helpful team at [email protected].
What’s in the Box?
1 x USB Microphone
1 x USB Cable
1 x User’s Guide
Feature Highlights
• High-speed AD/DA converter technology
• No driver needed for Windows 2000 and up
• 16Bit/48kHz sampling rate
• High quality condenser capsule for superior sound
• Strong output, no distortion & low power consumption
Connecting to Computer
After connecting your USB microphone to your computer using the included USB cable, proceed as follows:
Macintosh Setup:
1. Open System Preferences.
2. Click on ‘Sound’.
3. Click on ‘Input’ tab.
4. Select your microphone from list.
5. Set input volume to appropriate level.
Note!
Microphone is sensitive and may require a low volume setting.
6. Exit System Preferences.
Windows Setup:
1. Open system’s sound settings.
2. Select ‘Audio’ or ‘Recording’ (depending on OS).
3. Check box next to your microphone to make it default input device.
4. Set input volume to appropriate level.
5. Exit Control Panel.
Connecting to Recording Software
Garage Band:
1. Go to Preferences->Audio and select your microphone as input device.
2. Create vocal track and select your microphone as input device for that track.
3. If you experience distortion or crackling, adjust input level in control panel.
