2.2. Device technical parameters
1) stainless steel settler
2) perforated inlet, stainless steel, acid-resistant
3) clamps to close the lid (6)
4) wax discharge
5) steam generator:
-power supply 230V/50Hz
-power 1800W
-capacity 4L.
6) stainless wax extractor lid
3. Storing the device
Once the operation terminates, the device must be cleaned
and dries thoroughly.
The device is to be stored in dry rooms with the
temperature above 0º C.
Prior to every season, an additional technical check
-up
must
be
performed and if
any
defects have
been
detected,
contact the service centre
.
5.
Recycling
Worn-out product must be removed as waste only
within selective waste collection organised by the
Network of Communal Electric and Electronic Waste
Collecting Points. A customer is entitled to return the
used equipment to the electrical equipment distributor
network, at least free of charge and directly, if the
device to be returned is of proper type and serves the
same purpose as the newly purchased device
6.
Guarantee
Products purchased from
“Łysoń’
company are
encompassed by the
manufacturer’s guarantee.
The guarantee duration equals 24 months
A receipt or a VAT invoice is issued for each product
purchased
4. Cleaning and maintenance
IMPORTANT!
Prior to the
maintenance,
unplug the device.
Prior to the first usage, device must be cleaned and
dried thoroughly.
The device is to be washed with hot water with the
agents admissible to come into contact with the
equipment used in food processing added.
The device is to be washed with soft fabrics, make
sure to protect electric components.
After washing, rinse with clean water and dry. The
device is to be stored in a dry room.
The device components must not be protected with
chemical agents.
IMPORTANT!
If you notice a build-up of limescale on the heater,
purchase a suitable descaling agent and apply it to the
device. Limescale deposits increase the boiling time of
the water and can cause the heating element damage.
After removing the deposits, boil the water a few times
and emty the tank completely. Remove any residues of
the descaling agent from the generator, as it may
cause corrosion of the metal elements.
