2. Product description
The device is designed for the recovery of wax from bee frames or the dried product itself by means of the steam method.
1 2 4 3 5 6
2.1. Operation instructions
1
-Fill the steam generator (5) with water to the maximum level and connect to the power supply.
2
-Fill the basket (2) with dry wax.
3
-Cover the PP tank (1) tightly with the lid.
4
-Wait until steam is produced and melted wax comes out.
5
-Take care not to be scalded by the hot steam.
6
-After melting each load, check the water level and refill if necessary.
7
-If the steam generator runs out of water during the melting process:
•
unplug
•
wait until it cools down completely
•
unscrew the cap
6)
•
fill the generator with water.
•
Replace the cap
•
plug in
8
-
Refill the basket with dry wax.
9
-Repeat steps 6 and 7 until the melting is complete.
10
-When the process is complete, disconnect the generator from the power supply.
11
-Clean the basket of any waste in it and prepare it for the next use.
2.2. Technical specifications
1) PP tank - capacity 33L.
2) basket for dry wax, stainless, acid-resistant (sheet metal 0.6 mm thick) - capacity 20L.
3) stainless steel stand
4) wax tray
5) steam generator:
-power supply 230V/50Hz
-power rating 1800W
-water capacity 4L.
6) steam generator cap
