Wax melter with steam generator
Before first use read the manual carefully and follow the instructions contained therein. The manufacturer is not liable for
damage caused by equipment used inappropriately or by incorrect handling.
1. General safety instructions
1.1 Electrical safety
a)
Make sure that the nominal voltage of the device and power source are compatible.
b)
The electrical supply system must be fitted with a residual-current circuit breaker with rated tripping current not higher than
30mA. Performance of the circuit breaker should be checked periodically.
c)
Periodically check the condition of the power cord. Replace the power cord if damaged. Replacing the power cord can only
be performed by the manufacturer or by qualified personnel.
d)
In the event of damage to the device, to avoid any health and safety risks, repairs should be carried out only by qualified
personnel.
e)
Do not pull the power cord.
f)
Keep the power cord away from heat sources and sharp edges to ensure its good condition.
g)
Do not move the device during operation
1.2. Operation safety
a) The device is not intended for use by persons (including children) with limited physical, sensory or mental abilities, or by
inexperienced users, unless under supervision or with instructions given by an accountable party.
b)
Protect the steam generator (5) from moisture; (also during storage)
c) Do not use the device in the vicinity of flammable materialsh.
d) Never carry out any maintenance or repairs during operation or if the device is plugged in!
e) For indoor use only. The device is not suitable for outdoor use.
