Lynxmotion HQuad500, Assembly Manual

Page: 2 / 16

Lynxmotion UAV HQuad500 Frame Assembly Guide
1 - What’s Included
We strongly suggest that you go over all the included parts to make sure you have everything before starting the
assembly. This will also help you get used to the various components included in this kit.
Kit Contents
● 1x ­ Lynxmotion UAV ­ HQuad500 Hardware Bag
● 8x ­ Lyxnmotion UAV ­ 16mm Aluminum Clamp (2 pack)
○ 4x ­ 16mm Aluminum Clamp Half
○ 8x ­ 4­40 x ¼” Hex screw
○ 4x ­ 4­40 x ¾” Hex screw
○ 4x ­ 4­40 x ¼” Set screw
○ 8x ­ 2­56 x ¼” Phillips screw
● 4x ­ Lynxmotion Carbon Fiber Tube (16x14x220mm)
● 1x ­ HQuad500 Top Plate
● 1x ­ HQuad500 Bottom Plate
● 1x ­ HQuad500 Protect Plate
● 4x ­ HQuad500 Top Motor Mount
● 4x ­ HQuad500 Bottom Motor Mount
● 1x ­ HQuad500 Camera Plate
● 4x ­ HQuad500 Side Plate (for ESC’s)
● 4x ­ HQuad500 Tip Landing
● 4x ­ HQuad500 Wire Cap
● 2x ­ Lynxmotion Hook&Loop Strap
Hardware Bag Contents
● 12x ­ 4­40 x 3/16” x 1” Aluminum Standoff
● 4x ­ 4­40 x 3/16” x 0.25” Aluminum Standoff
● 12x ­ 4­40 x ¼” Hex screw
● 8x ­ 4­40 x ½” Set screw
● 8x ­ 4­40 x 3/16” Hex screw
● 20x ­ M3 x 5mm Hex screw
● 2x ­ Adhesive Backed Foam strip
● 15x ­ 3” Cable tie
● 4x ­ Rubber Grommet
● 3/32” Hex Key
Note: hardware type / quantity may change slightly depending on availability.
Lynxmotion UAV P.2