1 Part # 33807 Rev 2016
The following instructions are provided to help you assemble the Sedona by Lynx™ cart.
IMPORTANT
: Be sure to assemble on a soft surface to prevent scratching the stainless steel.
Tools required: Regular phillips-head screwdriver, small crescent wrench and gloves.
Assembly Instructions:
SEDONA L400CART
L500CART
L600CART
& L700 CART
Introduction:
Your freestanding cart comes with all of the components necessary to assemble a cart for the Sedona by Lynx™ series of grills.
The Sedona by Lynx™ cart series is comprised of 8 sub assemblies:
1. Back Panel Assembly
2. Right Side Panel Assembly with Shelf
3. Left Side Panel Assembly with Shelf
4. Base Assembly with Wheels
5. Interior Shelf Assembly
6. Cross Brace Assembly
7. Right Door
8. Left Door (L600/700)
In addition there are 14 screws (¼-20x½) to assemble the cart and grill. There are also 4 screws with corresponding nuts
(#8-32 x 3/8) to attach the transformer assembly which is supplied with the grill.
Back Panel
Left Side Panel
Right Side Panel
Base Assembly
Cross Brace
Cabinet Door Frame
(L600/700)
Left Door
Right Door
Interior Shelf
