RCT 5023-G Reference Manual Rev 1.2
Page 45 of 57
Control Tabs
The OH_RCT5023 Server option requires its own IP address and is functionally
independent from the host RCT 5023-G rack controller card.
If this server option is installed on a RCT 5023-G controller board the RCT 5023-G Rack
Controller gets an indication in the device list of the GUI
. A “-S” appendix is added to the
device name in the device list of the GUI indicating that this RCT 5023-G hosts a Server
option.
The Settings Tab of the RCT 5023-G-S Rack Controller will show additional information.
The network address settings of the hosted server is also possible form this tab then.
Through the “Go to hosted Server” button above the “Locate” button you are directed to
the Server page in the GUI.
