manualshive.com logo in svg

Lynx PTG 5610 B/D, Reference Manual

Share
Download
Lynx PTG 5610 B/D Reference Manual Download Page 35

         P TG 5610 B/D Reference Manual. Rev 1.0 

 

Page 35 of 53 

GUI Operation 

All LYNX CardModules support a computer interface which allows setting the modules 
parameters using a simple GUI interface. Access to all standard features (and in some 
cases) extended features is possible using this interface. 
 
Access to the GUI requires the use of the optional LYNX control system 
 

Note. Any settings made using the control system overrides any local settings 
made on the module. All settings are stored in internal flash ram and will survive 
power cycles and long term storage. 

 
The GUI screenshots below show the settings and adjustments possible for the  
P TG 5610. 
 

 

GUI Main Components 

Below you can see the primary GUI structure which will be displayed when the P TG 
5610 is plugged into the service adapter, or the module is accessed via the integrated 
USB ports on the Hard Case options. (The Same GUI is also used in the centralized 
control system). 
 
 
 

 

 

 
 

Summary of Contents for PTG 5610 B/D






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands