P TG 5610 B/D Reference Manual. Rev 1.0
Page 21 of 53
Multi Function Switch
The CardModule is equipped with a multi-function switch located on the front bottom
edge of the card. (See above)
Using the Local Display Menu
s
Making local adjustments to the module is done using the multifunction switch and the
integrated 4-character dot matrix display. The menu system is layered, and navigation
through the system is done using the
UP
and
DOWN
functions of the switch.
ENTER
is
used to move between menu levels and also enter a selection.
Menu Structure
The Menu structure is defined in the next table, and should be used when navigating
through the system.
ENTER
moves between levels,
UP/DOWN
moves between items within the level
When you enter a new setting the system will jump back one level in the menu system.
•
The “back” selection in the menu structure will take you back one level when selected.
•
When an item is selected which has several setting possibilities the first value
displayed will be the value currently stored in the system. The order of the available
settings for any menu item in the table supplied does not represent the order the
settings will actually be displayed.
•
If left unattended, the menu will default to the root display after a preset timeout.
** Note. The Adjustable Video Delay and Sync delay adjustments are qualified by the
Genlock mode the P TG 5610 is set to and the connected reference. These selections
will not be visible in the menu for certain modes of operation. Please refer to the “Analog
Sync Output / genlock Section of the manual.
Up
Down
Enter
Switch Operations
Multi-function Switch
Side
Front
Switch Function
Operation
UP
Move UP within a level
DOWN
Move down within a level
ENTER
Change levels / Make selection
