manualshive.com logo in svg

Lynx PTG 5610 B/D, Reference Manual

Share
Download
Lynx PTG 5610 B/D Reference Manual Download Page 10

         P TG 5610 B/D Reference Manual. Rev 1.0 

 

Page 10 of 53 

Supported Video Formats 

The P TG 5610 is a multi-format and multi-rate device designed to support standard 
definition (SDTV) video formats and 19 of the new H (DTV) digital video formats in a 
single module. Outputs are SDI (Digital) in 270Mbit or 1.485 Mbit depending on the 
selected format. 
 

SDTV Formats 

 

System 

Nomenclature 

Pixels/ 

Line 

Lines / 

frame 

Frame Rate 

Scanning  

format 

525 / 59.94 Hz 

720 

486 

60/1.001 

Interlaced 

625 / 50 Hz 

720 

576 

50 

Interlaced 

 

 

HDTV Formats 

 

System 

Nomenclature 

Pixels/ 

Line 

Lines / 

frame 

Frame Rate 

Scanning  

format 

1080P / 24Hz 

1920 

1080 

24 

Progressive 

1080P / 23.98Hz 

1920 

1080 

24/1.001 

Progressive 

1080P / 25Hz 

1920 

1080 

25 

Progressive 

1080PSF / 24Hz 

1920 

1080 

24 

Segmented Frame 

1080PSF / 23.98Hz 

1920 

1080 

24/1.001 

Segmented Frame 

1080PSF / 25Hz 

1920 

1080 

25 

Segmented Frame 

1080P / 30Hz 

1920 

1080 

30 

Progressive 

1080P / 29.97Hz 

1920 

1080 

30/1.001 

Progressive 

1080i / 59.94Hz 

1920 

1080 

30/1.001 

Interlaced 

1080i / 50Hz 

1920 

1080 

25 

Interlaced 

1080i / 60Hz 

1920 

1080 

30 

Interlaced 

720P / 24Hz 

1280 

720 

24 

Progressive 

720P / 23.98Hz 

1280 

720 

24/1.001 

Progressive 

720P / 25Hz 

1280 

720 

25 

Progressive 

720P / 30Hz 

1280 

720 

30 

Progressive 

720P / 29.97Hz 

1280 

720 

30/1.001 

Progressive 

720P / 59.94Hz 

1280 

720 

60/1.001 

Progressive 

720P / 50Hz 

1280 

720 

50 

Progressive 

720P / 60Hz 

1920 

720 

60 

Progressive 

 
 

Note. Support for additional formats may be provided and will be made available as a 
firmware upgrade, but this module hardware can never support 1080P/59.94Hz, 
1080P/60Hz or 1080P/50Hz due to the high bit rate requirements of these formats 
(2.97GHz). 

 

 
 

 

 

Summary of Contents for PTG 5610 B/D






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands