C DX 5624 Reference Manual. Rev 2.0
Settings and Control
The C DX 5624 module has an integrated micro-controller, which enables the module to
be configured and controlled locally using the multifunction switch and 4 character dot
matrix display (or from remote using a GUI interface when using one of the optional
controllers and control software).
Once set, all settings are automatically saved in non-volatile internal memory. (Flash
RAM) The module will always recall the last used settings.
Up
Down
Enter
Switch Operations
Multi-function Switch
Side
Front
CDX
5624
LED 1
(SDI Status)
Multi Function
Switch
Matrix Display
LED 1
(AES Status)
LED 3
(Alarm)
Multi Function Switch
The CardModule is equipped with a multi-function switch located on the front bottom
edge of the card. (See above)
Using the Local Display Menus
Making local adjustments to the module is done using the multifunction switch and the
integrated 4-character dot matrix display. The menu system is layered, and navigation
through the system is done using the
UP
and
DOWN
functions of the switch.
ENTER
is
used to move between menu levels and also enter a selection.
Switch Function
Operation
UP
Move UP within a level
DOWN
Move down within a level
ENTER
Change levels / Make selection
Page 13 of 29
