ADP-215
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
In this case, we can see that the cabinet do not have the same IP environment as the PC. So, select the cabinet and
modify the assigned IP in order to be able to connect to it.
By default, the Cabinet will have this IP 192.168.2.100
(Versions before 2009 could been asigned with IP
10.10.25.101 or IP 192.168.1.100)
The Network enviroment consists in the first 3 sets of three numbers separated by dots. In order to detect/communicate
with the cabinets, the software and the cabinets
must have the same Network settings
.
If it is not in the same environment Windows Profesional (2000, XP, VISTA) will detect it, but is not going to be able
to establish connection. In Windows Home, the processor is not going to be detected until the same enviroment is
applied.
In order to
change the IP
settings to have the same configuration as the PC, we can change the IP address of the
cabinets by clicking in the
Assign IP to select Device
button after writing in the box above the desired data.
Remember there cannot be two devices with exactly the same IP address, the last set of three numbers has to be
different and unique to each one of the devices.
14
