ADP-215
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
Fig 1
Fig 2
Fig 3
Fig 4
CONFIGURATION PANEL
On the back panel you will see 3 buttons and an information screen, on which you can read the established
parameters and information such as amplification module temperature, input signal level and name of the current
preset (Fig1). If changes are not made the display will automatically dim to save energy and avoid unnecessary light
in situations where light is not wanted. To re-activate the light simply press the OK button.
SELECT AND RUN PRESET
To change the preset configuration just press the up button (Fig2(1)) and down button (Fig2(2)) until you see the
title and preset number required. Once found, press OK (Fig2(3)) until the progress bar finishes (Fig3). The
display will indicate “Loading DSP” (Fig4)
Note:
In case of a power cut, the DSP will save its last configuration when restarted.
10
