background image

Page 26

Appendix

Appendix

Specifications

Analog I/O

A Model

Four inputs / four outputs

B Model

Two inputs / six outputs

C Model

Six inputs / two outputs

Type

Electronically balanced or unbalanced, XLR connectors on
L2Audio Cable

Level

+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV
max., software selectable in channel pairs

Input Impedance

Balanced mode: 24 k

 , Unbalanced mode: 12 k

Output Impedance

Balanced mode: 100 

 , Unbalanced mode: 50 

Output Drive Capability 600 

 impedance, 0.16 µF capacitance

A/D and D/A Type

24-bit, multi-level, delta-sigma

Sample Rates

8 kHz to 200 kHz, including all standard rates with variable
adjustment

Bit Depth

8, 16, 24 or 32 bit file types

On-board Buffer Size

16 Kbytes per input and output stream (mono or stereo)

Analog In Performance

(measured in 24-bit mode with card installed in computer)

Frequency Response

20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate

Dynamic Range

115 dB, A-wtd.

Signal-to-Noise

114 dB, A-wtd.

Channel Crosstalk

<-120 dB, 1 kHz signal @ -1dBFS

THD+N

-104 dB (0.0006%), 1kHz signal @ -1dBFS, 22 - 22 kHz BW

Analog Out Performance

(measured in 24-bit mode with card installed in computer)

Frequency Response

20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate

Dynamic Range

116 dB, A-wtd.

Signal-to-Noise

116 dB, A-wtd.

Channel Crosstalk

<-120 dB, 1 kHz signal @ -1dBFS

THD+N

-100dB (0.0010%), 1kHz signal @ -1dBFS, 22 - 22 kHz BW

Digital I/O

Number / Type

One input and one output
AES/EBU or S/P DIF format, transformer coupled, XLR
connectors on L2Sync Cable

Sample Rates

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

Sample Rate Conversion Supports conversion ratios up to 3:1 on digital input, 128 dB

dynamic range

Bit Depth

8, 16, 24 or 32 bit file types

Control / Status

Complete subcode and channel status support

On-board Buffer Size

16 Kbytes per input and output stream (mono or stereo)

LStream Expansion Ports

Number

One external and one internal

Compatibility

Supports Lynx ADAT, AES, TDIF, and other multichannel
expansion modules

Type

High-speed serial, eight channel input and output (each port),
24-bit data, 96kHz rate

Summary of Contents for LynxTWO





































Reviews: