LXNAV S10 Series, User Manual

Page: 64 / 121

Rev #37
Version 8.0 April 2021
Page 64 of 121
5.7.9.2 Vario Sounds
In this menu the user can change all the parameters for vario sounds.
The volume for Vario, FLARM and Speech can also be adjusted directly via the
upper rotary knob whilst in the FLARM, Waypoint and Task Modes.
5.7.9.2.1 Vario Volume
The user can set the default vario volume.
5.7.9.2.2 Sound shape
In this menu, you can choose between following shapes: Sinus, Triangular and Harmonic.
5.7.9.2.3 Vario audio mode:
•
Linear positive: the sound is interrupted with silence every few milliseconds when the
needle is positive; on negative side sound is linear (not interrupted).
•
Linear negative: inverse function to Linear positive .
•
Linear : the sound is linear and non-interrupted in full scale range.
•
Digital positive : similar to Linear positive , except the way of beeping is sl
•
Digital negative : inverse function to Digital positive .
•
Linear positive only : the sound is present only at positive values, for negative values
there is silence.
•
Digital positive only : similar function to Linear positive only , except the sound is
similar to the digital tone.
•
Digital: similar function to Linear , except the sound is similar to the digital tone. The
frequency is not changing linearly, but by steps. Sounds like playing a flute.
5.7.9.2.4 SC Audio Mode
SC audio mode has five modes:
•
SC positive : the sound is interrupted with silence every few milliseconds when the
needle is positive; on negative side sound is linear (not interrupted).
•
SC negative : inverse function to SC positive.
•
SC : the sound is linear and non-interrupted in full scale range.
•
SC Mixed : for positive relative values the sound represents relative; for negative
relative values the sound represents SC (for that setting it is recommended to set SC
needle to relative).
•
Relativ : the variometer will produce the same sound as defined in Vario audio, except it
will follow relative speed values.