LXNAV LX80xx User Manual Download

Page: 103 / 192

Operating Modes

Version 6.03, May 2017

Page 103 of 192

Export

saves a file in the LXPACK extension which includes: Airspace, Waypoints

and LX profile.

5.1.14

Language

The system can run in different languages.

Select the desired language. The main display unit will reload and restart in the new
language. If your language is not listed and you feel able to become a translator for the

system please do not hesitate to contact us.

Currently available languages are: Czech, German, English, Spanish, French, Italian, Dutch,

Polish, Slovenian, Finnish and Russian.

5.1.15

Passwords



00111

displays information about the system and its sensors.



01043

will perform “Auto zero” and set indicated speed to zero.



01049

will perform “Auto zero” and set indicated speed to zero for OLD LCD varios



09908

compass calibration process (factory and user calibration)



30000

browse through installed files (use with caution).



41000

first or forced update of Flarm.

Summary of Contents for LX80xx

































































































































































































Search results

Summary of Contents for LX80xx

Reviews:

Related manuals for LX80xx

Brands by name

Popular brands

LXNAV LX80xx, User Manual

Search results

Summary of Contents for LX80xx

Reviews:

Related manuals for LX80xx

Brands by name

Popular brands