LXNAV LX8000, User Manual

Page: 5 / 110

LX8000 (LX8080) Version 2.6 September 2011
Page 5 of 110
5.5.5.5 Airspace 63
5.5.5.6 Mark 63
5.5.5.7 Flarm 63
5.5.5.8 Rotate FAI Area 64
5.6 Way Point Mode 65
5.6.1 Editing Way Points 66
5.6.2 New Way Point 67
5.7 Task Mode 68
5.7.1 Task Edit 70
5.7.2 Task Creation 70
5.7.3 Modifying Zones 71
5.7.4 Task Options 72
5.7.4.1 Gate Time 73
5.7.4.2 Below Altitude Start Procedure 73
5.7.4.3 Maximum Start Speed and/or Maximum Start Altitude 73
5.7.5 Saving a Task 74
5.7.6 Loading a Task 74
5.7.7 Moving a Task Point 75
6 Variometer and Altimeter 76
6.1 Smart Vario Description 76
6.2 Altimeter 77
6.2.1 IGC Barograph Recalibration Procedure 77
6.3 Speed Command 77
7 Flying with the LX8000 78
7.1 On the Ground 78
7.1.1 Power on Procedure 78
7.1.2 Profile Selection 78
7.1.3 Set Elevation and QNH 79
7.1.4 Pre-flight Check 79
7.1.5 Preparing a Task 80
7.1.5.1 Assigned Area Tasks (AAT) 80
7.2 Flying a Task 82
7.2.1 Starting a Task 82
7.2.2 Restarting Task 83
7.2.3 Over Turn Point 83
7.2.4 Entering Assigned Area 84
7.2.5 Moving Point Inside Assigned Area 84
7.2.6 Task Finish 85
7.3 Procedure after Landing 85
8 Installation 86
8.1 Installing the LX8000 87
8.2 Installation of Options 88
8.3 Ports and Wiring 90
9 Firmware Update 93
10 Options 95
10.1 Flarm 95
10.1.1 Flarm External LED Display 95
10.1.1.1 Obstacles 96
10.1.1.2 Settings for the LX Flarm LED Display 96
10.1.2 Installation 97
10.1.2.1 Functional Check After Installation 97
10.1.3 Flarm Update Procedure 98