4
Quick Start
VX4 User’s Guide
E-EQ-VX4OGWW-H-ARC
Quick Start
This section’s instructions are based on the assumption that your new system is pre-configured
and requires only accessory installation (e.g. antenna, external keyboard and/or barcode scanner)
and a power source.
Use this guide as you would any other source book -- reading portions to learn about the VX4,
and then referring to it when you need more information about a particular subject. This guide
takes you through installation and operation of the LXE VX4.
In general, the sequence of events is:
1.
Install Vehicle Mounting Bracket (and keyboard mounting bracket) on vehicle.
2.
Secure VX4 in Mounting Bracket Assembly.
3.
Connect vehicle power source to VX4 power cable.
4.
Connect power cable to the VX4.
5.
Connect accessories to VX4, e.g. scanner, antenna, keyboard.
6.
Secure all cables to the VX4 with the Strain Relief Cable Clamps.
7.
Turn the VX4 on.
The VX4 and its keyboard should be mounted in an area in the vehicle where it:
•
Does not obstruct the vehicle operator’s vision or safe vehicle operation.
•
Will be protected from rain or inclement weather.
•
Will be protected from extremely high concentrations of dust or wind-blown debris.
•
Can be easily accessed by an operator seated in the driver’s seat.
