MX8WM with Label
MX8WM with Label
If the MX8WM has a Bluetooth address barcode label attached, follow these steps:
1. Scan the Bluetooth address barcode label, attached to the MX8WM, with the LXE Bluetooth mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the MX8WM Bluetooth label, the devices are paired. See sec-
tion titled “Bluetooth Beep and LED Indications”. If the devices do not pair successfully, go to the next step.
3. Open the LXEZ Pairing panel [Start | Settings | System | Bluetooth].
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Doubletap the Bluetooth scanner until the right-mouse-click menu appears.
6. Select Pair as Scanner to pair the MX8WM with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED flashes. Refer to the following
section titled “Bluetooth Beep and LED Indications”.
Note: After scanning the MX8WM Bluetooth label, if there is no beep and no LED flash from the Bluetooth device, the
devices are currently paired.
E-EQ-MX8WMRG-C [ 85 ] MX8WM Reference Guide
