System Configuration
77
E-EQ-MX6PCRG-C-ARC
MX6 PPC Reference Guide
Create a New Profile
Click the New icon. The following screen is displayed:
Figure 4-8 Add / Edit Network Profiles Display
Enter the values for the new profile .
Click Cancel to ignore all changes made on this screen. Click OK to make the changes, close this
screen and save the changes.
Modify an Existing Profile
When you need to modify an existing profile, select the profile to be modified from the Preferred
Profiles List on the Config tab screen. Click the Edit button.
Note: The SSID, Type, TX Rate, and Channel fields are unchangeable in AP mode, whereas TX
Rate and Channel fields can be changed in Peer-to-Peer mode.
Network Name and Type
SSID
Enter an SSID, which is the Network Name. Check with your network
administrator for Network Name (SSID).
Type
Choose from Peer-to-Peer or Access Point in the pull down menu. Access Point
mode is also called “Infrastructure” mode. Peer-to-Peer mode is used for
communication between two (or more) radios (cards) without an access point.
TX Rate
Choose 1Mb, 2 Mb, Auto 1/2 Mb, 5.5 Mb, 11 Mb, or Fully Auto from the menu.
The transmit rate is Fully Automatic by default.
Chan
Channel. Scroll to select a channel for communication.