LXE MX5X, Reference Manual

Page: 222 / 296

Symbol Client 205
E-EQ-MX5CERG-D MX5X Reference Guide
View Log
Displays the logon/connection data for the current network connection.
Add a new connection
Select Add New. Enter the ESSID in the Network Name text box.
Disable WEP
•
If WEP is to be disabled, tap the down arrow in the Authentication drop down box. Select
Open.
•
Tap the down arrow in the Encryption drop down box. Tap Disabled and WEP is disabled.
•
Tap the OK button to return to the Wireless Information tab.
Enable WEP
•
Tap the down arrow in the Authentication drop down box.
•
Tap the WEP Authentication protocol.
•
If the key is provided automatically by your network, check the Key provided automatically
checkbox.
•
If you wish to enter your Authentication key, uncheck the Key provided automatically
checkbox and enter the Network Key in the Network Key text box.
•
Tap the OK button to return to the Wireless Information tab.
Continue
Tap the Advanced … button. Make sure there is a checkmark in the Use Windows to configure my
wireless settings checkbox. Make sure there is
no checkmark in the Automatically connect to non-
preferred networks checkbox. Tap the Connect button.
Tap OK to return to the Wireless Information tab.
Tap the Connect button.
To access NETWLAN1 Properties again, tap the Network Connected icon in the Toolbar.
Select a User Certificate
1. Select Wireless Information Tab.
2. Select a network by doubletapping the network name.
3. In the IEEE 802.1X Authentication box, enable 802.1X authentication
4. Select an EAP type.
5. Tap the Properties button. Validate Server is enabled by default.
6. At the Authentication Settings display, tap the Select button to choose a User Certificate.