LXE MX5X, Reference Manual

Page: 210 / 296

Cisco Client Configuration 193
E-EQ-MX5CERG-D MX5X Reference Guide
Server Authentication
To validate the server certificate install the root CA certificate. For instructions for installing, see
Root Certificates , in this chapter.
Figure 5-37 Cisco Authentication Settings, Validate Server
Navigate to the Wireless Network Properties configuration screen.
Tap the Properties button.
Check Validate server.
Tap OK to dismiss the configuration boxes.
Figure 5-38 Cisco Advanced Wireless Settings, Authenticated SSID
Once the authentication completes, the status changes to show the mobile device has authenticated
to the <SSID>, as shown in the figure above.
Tap on the IP Information tab and make sure there is a valid IP address as shown in the figure
labeled
IP Information Tab , earlier in this chapter.