LXE MX5X, Reference Manual

Page: 176 / 296

Summit Client Configuration 159
E-EQ-MX5CERG-D MX5X Reference Guide
Button Function
Delete Deletes the profile. The current active profile cannot be deleted and an error
message is displayed if a delete is attempted.
New Creates a new profile with the default settings (see Config/Profile Parameters )
and prompts for a unique name. If the name is not unique, an error message is
displayed and the new profile is not created.
Rename Assigns a new, unique name. If the new name is not unique, an error message is
displayed and the profile is not renamed.
Scan Opens a window that lists access points that are broadcasting their SSIDs. Tap
the Refresh button to view an updated list of APs. Each AP’s SSID, its received
signal strength indication (RSSI) and whether or not data encryption is in use
(true or false). Sort the list by tapping on the column headers.
If the scan finds more than one AP with the same SSID, the list displays the AP
with the strongest RSSI and the least security.
Figure 5-5 SCU - Scan
If you are logged in as an Admin, tap an SSID in the list and tap the Connect
button, you return to the Profile window to create a profile for that SSID, with
the profile name being the same as the SSID (or the SSID with a suffix such as
“_1” if a profile with the SSID as its name exists already).
WEP Keys /
PSK Keys Allows entry of WEP keys or pass phrase as required by the type of encryption.
Note: Unsaved Changes -- Some versions of the SCU display a reminder if the Commit button
is not clicked before an attempt is made to close or browse away from the Config or
Profile tab.
Important – The settings for Auth Type , EAP Type and Encryption depend on the security type
chosen. Please refer to Wireless Security later in this Summit Client Utility section to determine
the proper settings for the security type implemented on the wireless LAN.