LXE MX5X, Reference Manual

Page: 175 / 296

158 Summit Client Configuration
MX5X Reference Guide E-EQ-MX5CERG-D
Config or Profile Tab
Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel
is exited before tapping the Commit button, changes are not saved!
Factory Default Settings
Config / Profile Default
SSID Blank
Client Name Blank
Power Save Fast
Tx Power Maximum
Bit Rate Auto
Radio Mode BG Optimized
or
BG Rates Full
Auth Type Open
EAP type None
Encryption None
or
Figure 5-4 SCU – Config / ProfileTab
When logged in as an Admin (see Admin Login ), use the Config or Profile tab to manage profiles.
When not logged in as an Admin, the parameters can be viewed, but cannot be changed. The
buttons on this tab are dimmed if the Admin is not logged in.
Buttons
Button Function
Commit Saves the profile settings made on this screen. Settings are saved in the profile.
Credentials Allows entry of a username and password, certificate names, and other
information required to authenticate with the access point. The information
required depends on the EAP type.