LXE MX5X, Reference Manual

Page: 117 / 296

Control Panel Options 99
E-EQ-MX5CERG-D MX5X Reference Guide
COM Ports
Figure 3-21 Scanner Properties / COM Port Settings
Adjust the settings and tap the OK box to save the changes. The changes take effect immediately.
The COM 1 display contains the same parameters as the COM 2 and COM 3 Tab. Adjust the
settings and tap the OK box to save the changes. The changes take effect immediately.
Note: Neither COM1 nor COM4 support 5V switchable power on Pin 9 for tethered scanners.
Good Scan and Bad Scan Sounds
Good scan and bad scan sounds are stored in the Windows folder, as SCANGOOD.WAV and
SCANBAD.WAV. These are unprotected WAV files and can be replaced by a WAV file of the
user’s choice. By default a good scan sound on the MX5X is a single 2700 Hz beep, and a bad
scan sound is a double beep.