LXE MX3X, Reference Manual

Page: 57 / 150

The Keypad 47
E-EQ-MX3XRG-A MX3X Reference Guide
LED Functions
Figure 2-13 LED Functions
Across the top of the keypad are LEDs that provide visual cues to current computer operation.
When the LED is not illuminated, the function is inactive.
LED When illuminated ...
2nd The next keypress is a 2
nd
keypress.
•
Orange when on
•
Blinks orange during configuration key sequence.
ALT The next keypress is an ALT keypress.
•
Orange when on and unlit when off.
CTRL The next keypress is a CTRL keypress.
•
Orange when on and unlit when off.
SHFT The next letter is the uppercase letter on alpha keys and the shifted character on the
numeric keypad keys.
•
Orange when on and unlit when off.
CAPS Uppercase letters are active until the CAPS key sequence is pressed again.
•
Orange when on and unlit when off.
SCNR Barcode scanner function, affected by both tethered scanners and the scanner
endcap.
•
Red - scanning.
•
Green - good scan.
•
Unlit - scanner is inactive.
BATT
B
Backup Battery. When illuminated, the backup battery is charging. When unlit, the
Backup Battery is not charging
STAT Status Indicator.
•
Yellow – device is booting up.
•
Blinking Green when display Suspend state begins.
BATT
M
Main Battery. When illuminated, main battery capacity is low.
•
Red – low battery.
•
Blinking Red – power fail.
•
Unlit - Main Battery is fully charged.
CHGR
Charger. When on, the MX3X is receiving external power either from the DC power
jack or the MX3X is seated in a powered cradle.
•
Red - Main Battery is charging.
•
Green - battery charge is complete and the MX3X is connected to external
power through the power jack or a powered cradle.