manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 40

30 Hardware 

Configuration 

MX3X Reference Guide 

 

E-EQ-MX3XRG-A 

Central Processing Unit 

The LXE MX3X CPU is an Intel Xscale PXA255 running at 400 MHz. 

Core Logic 

The MX3X supports the following I/O components of the core logic: 

• 

One PCMCIA slot (supports Type I or II PCMCIA cards). 

• 

One compact Flash card port (supports Type I and II cards). 

• 

One InfraRed port. 

• 

One Digitizer Input port (Touch screen). 

• 

Two I/O ports in six configurations (see section titled "Endcaps."). 

System Memory 

A CF Card FLASH is used for ROM, Flash for Windows CE .NET and Flash memory for 
bundled applications. The Flash is configured as the primary boot device and contains the 
Windows CE .NET image, boot loader, OAL, applications, utilities and device drivers.   

Any flash remaining beyond the Windows CE .NET image is formatted for use as a persistent 
memory drive (which appears in My Computer as the folder “System”). Any programs or data 
stored in this folder will not be lost if the memory backup battery fails.  

The computer has one Type II CF+ slot. The MX3X supports and auto detects up to 256MB of 
Type I compact flash memory.    

Video Subsystem 

The display has a 640 pixel (horizontal) by 240 pixel (vertical) format. The display contrast is 
adjustable with key sequences. Backlighting is available and can be adjusted with key sequences. 
The turn-off timing is configured through the Control Panel. The display controller supports 
Windows CE graphics modes. 

Touch screen allows mouse functions (pointing and clicking on the display or Signature Capture) 
using an LXE approved stylus.  

There are two types of displays available: transflective greyscale monochrome; and transmissive 
color.  

The transmissive color display is optimized for indoor lighting. It cannot be used without the 
backlight. The transflective monochrome is optimized for outdoor use but may also be used 
indoors. The monochrome display has an electroluminescent backlight. The color displays have a 
CCFL (Cold-Cathode Fluorescent Lighting) backlight. 

The transflective display appears to have a greenish hue when the display is off. The transmissive 
display appears black when the display is off.  

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands