LXE MX3X, Reference Manual

Page: 27 / 150

Getting Started 17
E-EQ-MX3XRG-A MX3X Reference Guide
Set the MX3X Power Schemes Timers
Note: Refer to the section titled "Power Modes" later in this guide for information relating to
the power states of the MX3X.
Select Start | Settings | Control Panel | Power | Power Schemes tab. Change the parameter
values and tap OK to save the changes.
Battery Power Scheme
Use this option when the MX3X will be running on battery power only.
Switch state to User Idle: Default is After 3 seconds
Switch state to System Idle: Default is After 15 seconds
Switch state to Suspend: Default is After 5 minutes
AC Power Scheme
Use this option when the MX3X will be running on external power (e.g. AC adapter, cigarette
adapter, powered cradle).
Switch state to User Idle: Default is After 2 minute
Switch state to System Idle: Default is After 2 minutes
Switch state to Suspend: Default is After 5 minutes
These mode timers are cumulative. The System Idle timer begins the countdown after the User
Idle timer has expired and the Suspend timer begins the countdown after the System Idle timer has
expired. When the User Idle timer is set to “Never”, the power scheme timers never place the
device in User Idle, System Idle or Suspend modes (even when the MX3X is idle).
Because of the cumulative effect, and using the Battery Power Scheme Defaults listed above:
•
The backlight turns off after 3 seconds of no activity,
•
The display turns off after 18 seconds of no activity (15sec + 3sec),
•
And the MX3X enters Suspend after 5 minutes and 18 seconds of no activity.