manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 19

Getting Started 

9 

E-EQ-MX3XRG-A 

 

MX3X Reference Guide 

Connect External Power Supply (Optional) 

There are three external power supplies available: 

• 

US AC/DC 12V Power Supply 

• 

Cigarette Lighter Adapter 

• 

International AC/DC 12V Power Supply 

   

 

Figure 1-8  US AC/DC 12V Power Supply and Automotive Power Adapter 

 

Figure 1-9  International AC/DC 12V Power Supply 

The MX3X DC power jack is located on the endcap. The cradle power jack is located on the back 
of the cradle. 

 

Figure 1-10  Connect External Power Supply 

1. 

Insert the barrel connector into the MX3X power jack and push in firmly. 

2. 

The CHGR LED above the keypad illuminates red when the main battery is charging and 
green when the main battery is fully charged. The BATT B illuminates orange when 
charging and unlit when charged. BATT M LED illuminates red when low or in critical 
suspend and is unlit at all other times. 

Note:  When the MX3X is receiving external power through a cradle, the cradle's Status LED 

and the MX3X's CHGR LED are illuminated. 

 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands