manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 112

102 

API Calls 

MX3X Reference Guide 

 

E-EQ-MX3XRG-A 

API Calls  

See Also:  

LXE CE API Programming Guide E-SW-WINAPIPG 

The LXE CE API Programming Guide documents only the LXE-specific API calls for the MX3X. 
It is intended as an addition to the standard Microsoft Windows CE API documentation. Details of 
many of the calls in the LXE guide may be found in Microsoft’s documentation. 

The APIs documented in the programming guide are included in the file LXEAPI.DLL, which is 
in the standard Windows CE image on the MX3X.  

For ease of software development, the files LXEAPI.H and LXEAPI.LIB are available on the 
accessories CD, which are the C/C++ include files and the link library for the DLL, respectively. 
Note that this DLL is installed in MX3X images with a version number of 1.2 or higher (as 
displayed on the screen during bootup).  

A full SDK is now included for Microsoft Embedded Visual C++ 4.0 (which is available free on 
the Microsoft website). 

 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands