LXE MX3Plus Reference Manual Download

Page: 93 / 272

Bluetooth Device Menu

Bluetooth Device Menu

Doubleclick on a listed device to bring up the Bluetooth device menu.

Bluetooth Device Right Click Menu

Tap

Pair as Scanner

to set up the MX3Plus to receive data from the scanner.

Tap

Pair as Printer

to set up the MX3Plus to send data to the printer.

Tap

Disconnect

to stop the connection between the MX3Plus and a paired Bluetooth device.

Tap

Delete

to remove an unpaired device from the Bluetooth device list. The device name and identifier is removed from the

MX3Plus Bluetooth Devices panel after the user taps OK.
Tap

Properties

for more information on the Bluetooth device.

Bluetooth Device Properties

Bluetooth Device Properties Menu

Data on the Bluetooth Properties panel cannot be changed by the user. The data displayed is the result of the device Query
performed during the Discovery process.

E-EQ-MX3PLUSRG-J [ 81 ] MX3Plus Reference Guide

Summary of Contents for MX3Plus
















































































































































































































































































Search results

Summary of Contents for MX3Plus

Reviews:

Related manuals for MX3Plus

Brands by name

Popular brands

LXE MX3Plus, Reference Manual

Search results

Summary of Contents for MX3Plus

Reviews:

Related manuals for MX3Plus

Brands by name

Popular brands