WPA/LEAP
WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
l
Enter the
SSID
of the Access Point assigned to this profile
l
Set
EAP Type
to
LEAP
l
Set
Encryption
to
WPA TKIP
l
Set
Auth Type
as follows:
l
If the Cisco/CCX certified AP is configured for open authentication, set the
Auth Type
radio parameter to
Open
.
l
If the AP is configured for network EAP only, set the
Auth Type
radio parameter to
LEAP
.
WPA/LEAP Profile Configuration
See
Sign-On vs. Stored Credentials
for information on entering credentials.
To use Stored Credentials, click on the
Credentials
button. No entries are necessary for Sign-On Credentials as the user will
be prompted for the Username and Password when connecting to the network.
WPA/LEAP Credentials
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
E-EQ-MX3PLUSRG-J [ 217 ] MX3Plus Reference Guide
