PEAP/GTC
PEAP/GTC
To use PEAP/GTC, make sure the following profile options are used.
l
Enter the
SSID
of the Access Point assigned to this profile
l
Set
EAP Type
to
PEAP-GTC
l
Set
Encryption
to
WPA TKIP
l
Set
Auth Type
to
Open
PEAP/GTC Profile Configuration
See
Sign-On vs. Stored Credentials
for information on entering credentials.
Click the
Credentials
button.
l
No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for
the User Name and Password when connecting to the network.
Enter these items as directed below.
PEAP/GTC Credentials
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
Click
OK
then click
Commit
. Ensure the correct Active Profile is selected on the
.
E-EQ-MX3PLUSRG-J [ 215 ] MX3Plus Reference Guide
