PEAP/MSCHAP
PEAP/MSCHAP
To use PEAP/MSCHAP, make sure the following profile options are used.
l
Enter the
SSID
of the Access Point assigned to this profile
l
Set
EAP Type
to
PEAP-MSCHAP
l
Set
Encryption
to
WPA TKIP
l
Set
Auth Type
to
Open
PEAP/MSCHAP Profile Configuration
See
Sign-On vs. Stored Credentials
for information on entering credentials.
Click the
Credentials
button.
l
No entries except the CA Certificate Filename are necessary for Sign-On Credentials as the user will be prompted for
the User Name and Password when connecting to the network.
l
For Stored Credentials, User, Password and the CA Certificate Filename must be entered.
Enter these items as directed below.
PEAP/MSCHAP Credentials
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
E-EQ-MX3PLUSRG-J [ 213 ] MX3Plus Reference Guide
